National Electrical Installation Standards

Standards as High as Your Own

 

General

Print | Share This
NECA200Cover_10

NECA 200-2010, Recommended Practice for Installing and Maintaining Temporary Electric Power at Construction Sites (ANSI)

Describes installation procedures for temporary power at construction sites. It covers the planning, installation, expansion, maintenance, cutover, and removal of temporary power systems operating at 600 volts or less. NECA 200 is approved as an American National Standard (ANS).

purchase »
NECA420_14

NECA 420-2014 Standard for Fuse Applications (ANSI)

This standard describes application and installation practices and procedures for low-voltage, medium-voltage, and high-voltage fuses. This publication applies to all classifications of fuses used for overcurrent protection of distribution, utilization, and control equipment used for power, heating, and lighting loads for commercial, institutional, and industrial use in nonhazardous indoor and outdoor locations.

purchase »
NECA700_10

NECA 700-2010 Standard for Installing Overcurrent Protection to Achieve Selective Coordination

Describes the application procedures for selecting and adjusting low-voltage overcurrent protective devices to achieve selective coordination. NECA 700 is approved as an American National Standard (ANS).
purchase »
CDlabel_NEISYearbookVol7

NEIS Yearbook Volume 9

This reference tool is a complete digital collection of NECA’s performance standards for electrical construction and maintenance. It contains the complete set of NEIS, including updated and new standards series through mid-2013. Several NEIS in the Yearbook have been revised and expanded to align with the current edition of the National Electrical Code and other applicable standards.
purchase »
NECA104Cover_WEB.jpg

NECA/AA 104-2012, Standard for Installing Aluminum Building Wire and Cable (ANSI)

This standard describes installation procedures and design considerations for aluminum building wire and cable in residential, commercial, institutional and industrial applications not exceeding 2000 volts. 

Developed jointly with the Aluminum Association, NECA/AA 104-2012 is approved as an American National Standard (ANS).

purchase »
130Cover_10

NECA 130-2010, Standard for Installing and Maintaining Wiring Devices

Describes the Installing and Maintaining of low-voltage wiring devices permanently installed on building premises wiring systems for residential, commercial, and industrial applications in non-hazardous (unclassified) locations, such as for convenience receptacles, lighting switches, disconnect switches, and fixed, stationary or portable electric signs.
purchase »
301Cover_09

NECA/FOA 301-2009, Standard for Installing and Testing Fiber Optics (ANSI)

Describes installation and testing practices for optical fiber systems used for communications purposes. Developed jointly with the Fiber Optic Association, the certification body for fiber optic technicians and installers. 

NECA/FOA 301 is approved as an American National Standard (ANS).
purchase »
1000and1001

NECA 1000, NEIS Specification System

The complete set of National Electrical Installation Standards in paper book format.

purchase »
ACF147

NECA 1001, NEIS Red Binders

These custom binders feature striking full-color graphics on the cover and spine, opens flat for easy use.

purchase »
NECA100-13

NECA 100-2013 NEIS Symbols for Electrical Construction Drawings (ANSI)

This publication describes graphic symbols used to represent electrical wiring and equipment on construction drawings,. In this publication, the term “electrical” is used to include electrical, electronic, and communications systems covered by the National Electrical Code (NFPA 70). This publication also summarizes recommended drawing practices for electrical construction drawings.

purchase »
NECA1-15Cover_WEB

NECA 1-2015 Standard Practice of Good Workmanship in Electrical Construction (ANSI)

Describes industry best practices for good workmanship in electrical construction. NECA 1 is approved as an American National Standard (ANS).
purchase »
NECA331_09

NECA 331-2009, Standard for Building and Service Entrance Grounding and Bonding (ANSI)

Describes installation procedures for building and service entrance grounding as well as building interior bonding and grounding.
purchase »
NECA90_09

NECA 90 (201x), Recommended Practice for Commissioning Building Electrical Systems

This standard describes installation procedures for commissioning newly installed or retrofitted building electrical systems. It defines the process of commissioning building electrical systems and provides sample guidelines for attaining optimum system performances that conform to design, specification, and industry-accepted codes and standards.
purchase »

NEIS Yearbook CD covers for NECA Chapters

Promote your chapter by customizing your members’ copies with your chapter’s name on the NEIS CD cover of the yearbook.

The ninth volume of the National Electrical Installation Standards (NEIS®) Yearbook CD collection, released by the National Electrical Contractors Association (NECA), is a complete digital collection of NECA’s ANSI-accredited installation standards for electrical construction and maintenance. It includes updated and new standards added to the series through mid-2013.

We strongly recommend you that you invest in this valuable industry reference tool for your members. For orders and questions, contact the NECA Order Desk at (301) 215-4504 tel, or e-mail orderdesk@necanet.org.

NOTE: Quantity and member discounts are available. This custom cover option is available for print on demand orders of more than 10 copies only.

The two options available are as follows:

  1. Compliments of [EXAMPLE] NECA Chapter
  2. Courtesy of [EXAMPLE] NECA Chapter

NEIS Yearbook Volume 9

This reference tool is a complete digital collection of NECA’s performance standards for electrical construction and maintenance. It contains the complete set of NEIS, including updated and new standards series through mid-2013. Several NEIS in the Yearbook have been revised and expanded to align with the current edition of the National Electrical Code and other applicable standards.


NEIS Yearbook CD covers for NECA Chapters

Promote your chapter by customizing your members’ copies with your chapter’s name on the NEIS CD cover of the yearbook.

The ninth volume of the National Electrical Installation Standards (NEIS®) Yearbook CD collection, released by the National Electrical Contractors Association (NECA), is a complete digital collection of NECA’s ANSI-accredited installation standards for electrical construction and maintenance. It includes updated and new standards added to the series through mid-2013.

We strongly recommend you that you invest in this valuable industry reference tool for your members. For orders and questions, contact the NECA Order Desk at (301) 215-4504 tel, or e-mail orderdesk@necanet.org.

NOTE: Quantity and member discounts are available. This custom cover option is available for print on demand orders of more than 10 copies only.

The two options available are as follows:

  1. Compliments of [EXAMPLE] NECA Chapter
  2. Courtesy of [EXAMPLE] NECA Chapter